Haltech Elite 750 + Premium Universal Wire In Harness Kit 2.5m (8')

HARNESS OVERVIEW

Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one end and unterminated wires at the other . All the wires at the unterminated end are colour coded and clearly labelled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go!

Colour coded and labelled wires that match the detailed wiring diagram for a confusion free construction process.

The wiring diagram is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.

ECU OVERVIEW

The Elite 750 is an entry-level ECU offering many features available on the more advanced Elite 1500/2500 at an affordable price. Featuring a robust, environmentally sealed, waterproof case, 6 fuel and 6 ignition channels, on-board data logging and flex fuel tuning the Elite 750 is a powerful, compact ECU. Alongside the Elite 750 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.

Supports 1 to 8 Cylinder engines

1 to 3 Rotor engines

Normally aspirated or forced induction

Load sensing by Throttle Position (TPS), Manifold

Pressure (MAP) or Mass Air Flow (MAF)

Staged, Sequential, semi sequential, batch or multipoint injection patterns

Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems

Connect to a wide range of display dashes and expansion devices via CAN.

Waterproof case (IP67) (with USB cover fitted)

34 position AMP connector

6 x Fuel Injection Outputs (peak and hold (0-8A peak / 0-2A hold)

6 x Ignition Outputs

2 x Dedicated Engine Position inputs with extensive trigger type support

2 x Digital Pulsed Inputs

5 x Digital Pulsed Outputs

2 x Analogue Voltage Inputs

3 x Dedicated Inputs (Throttle Position, Coolant Temperature & Air Temperature)

Internal 3Bar MAP sensor rated up to 200kPa of boost (2Bar/29psi)

Up to 45 channels of Input & Output (I/O) expansion (via CAN)

USB Laptop Communication (Windows)

On-board data logging

ESP Calibration Software - Intuitive and easy to use

IMPORTANT EMISSIONS NOTICE:

In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.